Atten ST-100 100W Soldering Station
● Smart recognition of working or non-working status.
● Automatic standby, shutdown with smart time setting.
● High quality silver alloy heater to achieve quicker heating-up
● Temperature locking.
● Beep alarm function available.
● Temperature read out in ℃ and ℉
● MCU controlled temperature calibration.
● Simulate bar indicating heating up status.
● User-friendly menu enables system setting easier.
● Separate iron stand to save room and to make easier deposit.
● New design with LCD display screen making control visualization.
● Buttons(1,2,3) for pre-setting or switching frequently used temperature.
● Low-voltage heater separated from power supply to keep soldering work safer.
● Soldering tip designed separate from heater and using
● Exchangeable AT800 series to save use-cost.
https://www.atten.com/products/atten...g-station.html
| Specifications: |
Package list: |
Standard Packing: |
|---|
| Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz(Optional) |
Main Unit: 1 Unit |
Inner box: 31.5x27x15.2(cm) |
| Power：100W |
Handle set : 1 PCS |
N.W.: 2.68kg |
| Heater voltage：24VAC |
Iron stand: 1 PCS |
G.W.: 2.95kg |
| Temperature range：150~480°C |
AC cord: 1 PCS |
Carton: 6 PCS/Carton |
| Temperature offset range：±50°C |
Manual: 1 Copy |
Size: 55.5x33x48(cm) |
| Temperature stability：±2°C (in still air, no load) |
Cleaning sponge: 1 PCS |
N.W.: 17.9kg |
| Temperature adjustment：5 digits (Default)/1 digit (Fine-tuning) |
|
G.W.: 19.0kg |
| Automatic stand-by time：1-120 minutes （Adjustable） |
|
|
| Automatic shutdown time：1-120 minutes （Adjustable） |
|
|
| Heater：100W Silver alloy heater |
|
|
| Tip-to-ground impedance：< 2Ω |
|
|
| Tip-to-ground voltage：< 2mV |
