Using H4 headlight bulbs in 1998 - 2001 VFR800: any issues?

I’m contemplating using H4 headlight bulbs in my 1998 VFR800. I see from reading the forums that some have fitted H4 bulbs by trimming the tabs of the standard H4 bulb to fit Honda’s oddball headlight bulb socket. My concern is for the wires, connectors, and switches in the headlight circuit. A standard H4 is rated at 60W/55W, while Honda’s VFR bulb is rated at 45W/45W. A standard H4 will pull 33% or 22% more current, depending on whether it’s in high beam or low beam. For those that fitted standard H4 bulbs, especially in hot climates, have you had any issue with melting harnesses?

Thanks.

Which solution would be better, cut the tabs or bend them? Logically, clipping the tab should provide a 100% result. But this procedure still seems dangerous. It'd be easy to bend the tabs, but then questions about the stability of the light bulbs remain relevant. I'm not good at setting up lighting. Even LED strips with 16 million colors seem like a miracle of technology to me. While writing this, I decided I wouldn't risk it and just peel back the tabs, lol. H4 looks decent, so it's worth giving them a chance to work without additional manipulations.